Our Product
S-RTM6-00ZC
All Metal, RT® Free-Running Locknuts
PEM® S-RT™ free-running locknuts are free-running until clamp load is induced. A modified thread angle on the loaded flank provides the vibration resistant locking feature.
Screw turns freely until a clamp load is applied.
Resistant to vibrational loosening.
Back side of panel is flush or sub-flush for screw installation.
Locking feature reusability is not affected by number of on/off cycles.
Uses same mounting hole and installation tooling as standard S™ nut fasteners found in PEM® Bulletin CL.
Available on Pre-order
L/T "4 - 8 Weeks"
Login/Register to order!
| Thread Code | |
|---|---|
| Thread Size | |
| Thread Size X Pitch | |
| Thread Specification | Modified thread form on loaded flank. Will accept a maximum material 6g screw. |
| Fastener Material | |
| Optional Finish | |
| For Use in Sheet Hardness | |
| Product Category | |
| CAD Supplier | |
| CADPartID | |
| Application Type | Aerospace, Automotive, Automotive Electronics, Commercial Vehicles, Consumer Electronics, Datacom, Electric Vehicle Chargers, Electric Vehicles, Electronics, Industrial, Manufacturing & Sheet Metal Fabrication, Marine, Medical, Renewable Energy, Telecom |
| Base Panel Material | |
| Brand | |
| Fastener Characteristics | |
| Industry | Automotive, Automotive Electronics, Datacom & Telecom, Electic Vehicles, Industrial & Commercial, Medical |
| PEM Product Family | |
| Product Type | |
| Technology Type | |
| Unit (Metric/Unified) | |
| A Shank Max | |
| E ± 0.25_mm | |
| Hole Size in Sheet + 0.08_mm | |
| C Max._mm | |
| Rec. Min. Sheet Thickness_mm | |
| T ± 0.25_mm |
Resources
Catalog
Tech SheetWhite Paper
Installation & Performance Data
| TYPE | THREAD CODE | SHANK CODE | TEST SHEET MATERIAL | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | |
|---|---|---|---|---|---|---|---|
| S | RTM6 | 00 | 5052-H34 Aluminum | 18-32 | 750 | 6.5 | |
| S | RTM6 | 0 | 5052-H34 Aluminum | 18-32 | 970 | 7.9 | |
| S | RTM6 | 1 | 5052-H34 Aluminum | 18-32 | 1580 | 10.2 | |
| S | RTM6 | 2 | 5052-H34 Aluminum | 18-32 | 1580 | 14.1 | |
| S | RTM6 | 00 | Cold-Rolled Steel | 27-36 | 900 | 10 | |
| S | RTM6 | 0 | Cold-Rolled Steel | 27-36 | 1380 | 13 | |
| S | RTM6 | 1 | Cold-Rolled Steel | 27-36 | 1760 | 17 | |
| S | RTM6 | 2 | Cold-Rolled Steel | 27-36 | 1760 | 17 |
| TYPE | THREAD CODE | SHANK CODE | TEST SHEET MATERIAL | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| S | RTM6 | 00 | 5052-H34 Aluminum | 18-32 | 750 | 6.5 | ||||
| S | RTM6 | 0 | 5052-H34 Aluminum | 18-32 | 970 | 7.9 | ||||
| S | RTM6 | 1 | 5052-H34 Aluminum | 18-32 | 1580 | 10.2 | ||||
| S | RTM6 | 2 | 5052-H34 Aluminum | 18-32 | 1580 | 14.1 | ||||
| S | RTM6 | 00 | Cold-Rolled Steel | 27-36 | 900 | 10 | ||||
| S | RTM6 | 0 | Cold-Rolled Steel | 27-36 | 1380 | 13 | ||||
| S | RTM6 | 1 | Cold-Rolled Steel | 27-36 | 1760 | 17 | ||||
| S | RTM6 | 2 | Cold-Rolled Steel | 27-36 | 1760 | 17 |