Thread Code | |
---|---|
Thread Size | |
Thread Specification | |
Shank Code | |
Fastener Material | |
Fastener Materials – Nut | |
For Use in Sheet Hardness | |
Float | |
Product Category | |
CAD Supplier | |
CADPartID | |
Thread Type | |
Brand | |
Fastener Characteristics | |
PEM Product Family | |
Product Type | |
Technology Type | |
Unit (Metric/Unified) | |
A Shank Max | |
E ± .015_in | |
Min. Sheet Thickness_in | |
C Max._in | |
D Max._in | |
T1 Max._in |
Our Product
A4-024-1
Floating Self-Clinching Fasteners A4, AS, AC
Locking and Non-locking ThreadsThese fasteners provide load-bearing threads in thin sheets and permit up to .030” adjustment for mating hole misalignment.
The self-clinching feature offers fast and simple assembly. The fasteners are squeezed into prepared holes using any standard press. The sheet remains flush on one side, and the fastener is permanently locked in place.
Extra strength and support in assembly is obtained by the threads of the floating nut extending fully into the retainer shank (a unique PEM feature). A self-locking version of the fastener is also offered. Thread locking torque performance is equivalent to applicable NASM25027 specifications.
Non-locking Type A4 and self-locking Type LA4 fasteners provide load-bearing threads in stainless steel sheets as thin as .038” with hardness up to HRB 88 on the Rockwell “B” scale.
Many PEM Type AS and AC self-clinching floating fasteners correspond to sizes in US NASM45938/11 specifications. Check our web site for a complete Military Specification and National Aerospace Standards Reference Guide (Bulletin NASM).
Available on Pre-order
L/T "4 - 8 Weeks"
Login/Register to order!
Thread Code | 024 |
Thread Size | .190-24 (#10-24), #10-24 |
Thread Specification | 2B, ANSI B1.1, Internal |
Shank Code | 1 |
Fastener Material | 400 Series Stainless Steel |
Fastener Materials – Nut | 300 Series Stainless Steel |
Fastener Materials – Retainer | 400 Series Stainless Steel |
Standard Finish – Retainer & Nut | Passivated and/or tested per ASTM A380 |
For Use in Sheet Hardness | HRB 88 / HB 183 or Less |
Float | .015” minimum, in all directions from center, .030” total |
Product Category | Floating Self-Clinching Fasteners A4, AS, AC |
CAD Supplier | PennEngineering® (PEM®) |
CAD Part ID | 103680 |
Thread Type | Non-Locking |
Brand | PEM |
Fastener Characteristics | Floating |
PEM Product Family | ALA, SS |
Product Type | Nuts |
Technology Type | Self-Clinching |
Unit (Metric/Unified) | Unified |
A Shank Max | 0.038in |
E ± .015_IN | .470in |
Hole Size in Sheet + .003 – .000_IN | .406in |
Min. Dist. Hole C/L to Edge_IN | .360in |
Min. Sheet Thickness_IN | .038in |
C Max._IN | .405in |
D Max._IN | .405in |
T1 Max._IN | .170in |
Resources
Installation & Performance Data
TYPE | THREAD CODE | TEST SHEET MATERIAL | INSTALLATION (kN) | RETAINER PUSHOUT (N) | RETAINER TORQUE-OUT (N•m) | |
---|---|---|---|---|---|---|
A4, LA4 | M3 | 300 Series Stainless Steel | 40 | 890 | 9.6 | |
A4, LA4 | M4 | 300 Series Stainless Steel | 53 | 890 | 9.6 | |
A4, LA4 | M5 | 300 Series Stainless Steel | 57 | 1100 | 14.1 |
TYPE | THREAD CODE | TEST SHEET MATERIAL | INSTALLATION (lbs.) | RETAINER PUSHOUT (lbs.) | RETAINER TORQUE-OUT (in. lbs.) | |
---|---|---|---|---|---|---|
A4, LA4 | 440 | 300 Series Stainless Steel | 9000 | 200 | 85 | |
A4, LA4 | 632 | 300 Series Stainless Steel | 10000 | 200 | 85 | |
A4, LA4 | 832 | 300 Series Stainless Steel | 12000 | 200 | 85 | |
A4, LA4 | 032 | 300 Series Stainless Steel | 13000 | 250 | 125 |
TYPE | THREAD CODE | SHANK CODE | TEST SHEET MATERIAL | INSTALLATION (kN) | RETAINER PUSHOUT (N) | RETAINER TORQUE-OUT (N•m) |
---|---|---|---|---|---|---|
AC, AS, LAS, LAC | M3 | 1 | 5052-H34 Aluminum | 6.7 | 956 | 7.3 |
AC, AS, LAS, LAC | M3 | 2 | 5052-H34 Aluminum | 8.9 | 1000 | 9 |
AC, AS, LAS, LAC | M4 | 1 | 5052-H34 Aluminum | 8.9 | 1112 | 15.8 |
AC, AS, LAS, LAC | M4 | 2 | 5052-H34 Aluminum | 8.9 | 1178 | 16.9 |
AC, AS, LAS, LAC | M5 | 1 | 5052-H34 Aluminum | 8.9 | 1134 | 16.9 |
AC, AS, LAS, LAC | M5 | 2 | 5052-H34 Aluminum | 8.9 | 1556 | 19.7 |
AC, AS, LAS, LAC | M6 | 2 | 5052-H34 Aluminum | 13.3 | 1779 | 36.7 |
AC, AS, LAS, LAC | M3 | 1 | Cold-Rolled Steel | 13.3 | 1334 | 9.6 |
AC, AS, LAS, LAC | M3 | 2 | Cold-Rolled Steel | 13.3 | 1334 | 16.9 |
AC, AS, LAS, LAC | M4 | 1 | Cold-Rolled Steel | 13.3 | 1334 | 16.9 |
AC, AS, LAS, LAC | M4 | 2 | Cold-Rolled Steel | 13.3 | 1779 | 22.6 |
AC, AS, LAS, LAC | M5 | 1 | Cold-Rolled Steel | 15.6 | 1779 | 16.9 |
AC, AS, LAS, LAC | M5 | 2 | Cold-Rolled Steel | 15.6 | 2001 | 22.6 |
AC, AS, LAS, LAC | M6 | 2 | Cold-Rolled Steel | 22.2 | 2224 | 36.7 |
TYPE | THREAD CODE | SHANK CODE | TEST SHEET MATERIAL | INSTALLATION (lbs.) | RETAINER PUSHOUT (lbs.) | RETAINER TORQUE-OUT (in. lbs.) |
---|---|---|---|---|---|---|
AC, AS, LAS, LAC | 440 | 1 | 5052-H34 Aluminum | 1500 | 215 | 65 |
AC, AS, LAS, LAC | 440 | 2 | 5052-H34 Aluminum | 2000 | 225 | 80 |
AC, AS, LAS, LAC | 632 | 1 | 5052-H34 Aluminum | 2000 | 240 | 140 |
AC, AS, LAS, LAC | 632 | 2 | 5052-H34 Aluminum | 2000 | 250 | 150 |
AC, AS, LAS, LAC | 832 | 1 | 5052-H34 Aluminum | 2000 | 250 | 140 |
AC, AS, LAS, LAC | 832 | 2 | 5052-H34 Aluminum | 2000 | 265 | 150 |
AC, AS, LAS, LAC | 024 | 1 | ||||
AC, AS, LAS, LAC | 024 | 2 | ||||
AC, AS, LAS, LAC | 032 | 1 | 5052-H34 Aluminum | 2000 | 300 | 150 |
AC, AS, LAS, LAC | 032 | 2 | 5052-H34 Aluminum | 2000 | 350 | 175 |
AC, AS, LAS, LAC | 420 | 2 | 5052-H34 Aluminum | 3000 | 400 | 325 |
AC, AS, LAS, LAC | 428 | 2 | 5052-H34 Aluminum | 3000 | 400 | 325 |
AC, AS, LAS, LAC | 440 | 1 | Cold-Rolled Steel | 3000 | 300 | 85 |
AC, AS, LAS, LAC | 440 | 2 | Cold-Rolled Steel | 3000 | 300 | 150 |
AC, AS, LAS, LAC | 632 | 1 | Cold-Rolled Steel | 3000 | 300 | 150 |
AC, AS, LAS, LAC | 632 | 2 | Cold-Rolled Steel | 3000 | 300 | 175 |
AC, AS, LAS, LAC | 832 | 1 | Cold-Rolled Steel | 3000 | 300 | 150 |
AC, AS, LAS, LAC | 832 | 2 | Cold-Rolled Steel | 3000 | 400 | 200 |
AC, AS, LAS, LAC | 024 | 1 | ||||
AC, AS, LAS, LAC | 024 | 2 | ||||
AC, AS, LAS, LAC | 032 | 1 | Cold-Rolled Steel | 3500 | 400 | 150 |
AC, AS, LAS, LAC | 032 | 2 | Cold-Rolled Steel | 3500 | 450 | 200 |
AC, AS, LAS, LAC | 420 | 2 | Cold-Rolled Steel | 3000 | 500 | 325 |
AC, AS, LAS, LAC | 428 | 2 | Cold-Rolled Steel | 3000 | 500 | 325 |
TYPE | THREAD CODE | TEST SHEET MATERIAL | INSTALLATION (kN) | RETAINER PUSHOUT (N) | RETAINER TORQUE-OUT (N•m) | |
---|---|---|---|---|---|---|
A4, LA4 | M3 | 300 Series Stainless Steel | 40 | 890 | 9.6 | |
A4, LA4 | M4 | 300 Series Stainless Steel | 53 | 890 | 9.6 | |
A4, LA4 | M5 | 300 Series Stainless Steel | 57 | 1100 | 14.1 |
TYPE | THREAD CODE | TEST SHEET MATERIAL | INSTALLATION (lbs.) | RETAINER PUSHOUT (lbs.) | RETAINER TORQUE-OUT (in. lbs.) | ||||
---|---|---|---|---|---|---|---|---|---|
A4, LA4 | 440 | 300 Series Stainless Steel | 9000 | 200 | 85 | ||||
A4, LA4 | 632 | 300 Series Stainless Steel | 10000 | 200 | 85 | ||||
A4, LA4 | 832 | 300 Series Stainless Steel | 12000 | 200 | 85 | ||||
A4, LA4 | 032 | 300 Series Stainless Steel | 13000 | 250 | 125 |
TYPE | THREAD CODE | SHANK CODE | AXIAL TENSILE STRENGTH (KN) | MAX. SCREW TIGTHENING TORQUE (N•m) | TEST SHEET MATERIAL | INSTALLATION (KN) | PUSHOUT (N) |
---|---|---|---|---|---|---|---|
F4 | 256 | 1 | 0.57 | 0.16 | 300 Series Stainless Steel | 32 | 1200 |
F4 | 256 | 2 | 0.57 | 0.16 | 300 Series Stainless Steel | 32 | 1200 |
F4 | 440 | 1 | 0.68 | 0.23 | 300 Series Stainless Steel | 32 | 1200 |
F4 | 440 | 2 | 0.68 | 0.23 | 300 Series Stainless Steel | 32 | 1200 |
F4 | 632 | 1 | 0.85 | 0.36 | 300 Series Stainless Steel | 32 | 1200 |
F4 | 632 | 2 | 0.85 | 0.36 | 300 Series Stainless Steel | 32 | 1200 |
F4 | 832 | 1 | 1 | 0.58 | 300 Series Stainless Steel | 40 | 2000 |
F4 | 832 | 2 | 1 | 0.58 | 300 Series Stainless Steel | 40 | 2000 |
F4 | 032 | 1 | 1.3 | 0.88 | 300 Series Stainless Steel | 40 | 2000 |
F4 | 032 | 2 | 1.3 | 0.88 | 300 Series Stainless Steel | 40 | 2000 |
F4 | 0420 | 3 | 4.5 | 3.7 | 300 Series Stainless Steel | 65 | 4500 |
F4 | 0420 | 4 | 4.5 | 3.7 | 300 Series Stainless Steel | 65 | 4500 |
F4 | 0420 | 5 | 4.5 | 3.7 | 300 Series Stainless Steel | 65 | 4500 |
TYPE | THREAD CODE | SHANK CODE | AXIAL TENSILE STRENGTH (lbs.) | MAX. SCREW TIGTHENING TORQUE (in. lbs.) | TEST SHEET MATERIAL | INSTALLATION (lbs.) | PUSHOUT (lbs.) |
---|---|---|---|---|---|---|---|
F4 | 256 | 1 | 130 | 1.50 | 300 Series Stainless Steel | 7200 | 270 |
F4 | 256 | 2 | 130 | 1.50 | 300 Series Stainless Steel | 7200 | 270 |
F4 | 440 | 1 | 165 | 2.50 | 300 Series Stainless Steel | 7200 | 270 |
F4 | 440 | 2 | 165 | 2.50 | 300 Series Stainless Steel | 7200 | 270 |
F4 | 632 | 1 | 190 | 3.50 | 300 Series Stainless Steel | 7200 | 290 |
F4 | 632 | 2 | 190 | 3.50 | 300 Series Stainless Steel | 7200 | 290 |
F4 | 832 | 1 | 230 | 5.25 | 300 Series Stainless Steel | 9000 | 450 |
F4 | 832 | 2 | 230 | 5.25 | 300 Series Stainless Steel | 9000 | 450 |
F4 | 032 | 1 | 280 | 7.50 | 300 Series Stainless Steel | 9000 | 450 |
F4 | 032 | 2 | 280 | 7.50 | 300 Series Stainless Steel | 9000 | 450 |
F4 | 0420 | 3 | 1035 | 36 | 300 Series Stainless Steel | 14000 | 1000 |
F4 | 0420 | 4 | 1035 | 36 | 300 Series Stainless Steel | 14000 | 1000 |
F4 | 0420 | 5 | 1035 | 36 | 300 Series Stainless Steel | 14000 | 1000 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL THRU (N) |
---|---|---|---|---|---|---|---|---|
FH4 | M3 | 1.3 | 1.5 mm Stainless Steel | 87 | 40 | 2220 | 1.8 | 3500 |
FH4 | M4 | 3.8 | 1.5 mm Stainless Steel | 86 | 50 | 3210 | 6.5 | 8000 |
FH4 | M5 | 6 | 1.5 mm Stainless Steel | 86 | 53 | 3560 | 10.7 | 10000 |
FH4 | M6 | 11 | 1.6 mm Stainless Steel | 88 | 100 | 4200 | 15.9 | 14900 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL THRU (lbs.) |
---|---|---|---|---|---|---|---|---|
FH4 | 440 | 11 | .060″ Stainless Steel | 87 | 9000 | 450 | 16 | 800 |
FH4 | 632 | 22 | .060″ Stainless Steel | 87 | 9500 | 540 | 27 | 1350 |
FH4 | 832 | 35 | .060″ Stainless Steel | 86 | 11200 | 780 | 58 | 1800 |
FH4 | 032 | 51 | .060″ Stainless Steel | 86 | 12000 | 800 | 95 | 2250 |
FH4 | 0420 | 117 | .062″ Stainless Steel | 88 | 23000 | 1600 | 156 | 3900 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL THRU (N) |
---|---|---|---|---|---|---|---|---|
FHP | M3 | 1.3 | 2 mm Stainless Steel | 86 | 40 | 2500 | 1.6 | 3500 |
FHP | M4 | 2.9 | 1.14 mm Stainless Steel | 86 | 50 | 3000 | 3.9 | 6000 |
FHP | M5 | 4.4 | 1.14 mm Stainless Steel | 86 | 53 | 3560 | 7.35 | 7320 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL THRU (lbs.) |
---|---|---|---|---|---|---|---|---|
FHP | 440 | 8.1 | .045″ Stainless Steel | 86 | 9000 | 520 | 10.6 | 605 |
FHP | 632 | 16 | .045″ Stainless Steel | 86 | 9500 | 670 | 19.5 | 940 |
FHP | 832 | 28 | .045″ Stainless Steel | 86 | 11200 | 785 | 37.5 | 1415 |
FHP | 032 | 34 | .045″ Stainless Steel | 86 | 12000 | 800 | 59.5 | 1500 |
TYPE | THREAD CODE | TEST SHEET MATERIAL | INSTALLATION (kN) | RETAINER PUSHOUT (N) | ||||
---|---|---|---|---|---|---|---|---|
PFC4 | M3 | 304 Stainless Steel | 40.5 | 1557 | ||||
PFC4 | M4 | 304 Stainless Steel | 48 | 2002 | ||||
PFC4 | M5 | 304 Stainless Steel | 52.5 | 2447 |
TYPE | THREAD CODE | TEST SHEET MATERIAL | INSTALLATION (lbs.) | RETAINER PUSHOUT (lbs.) | ||||
---|---|---|---|---|---|---|---|---|
PFC4 | 440 | 304 Stainless Steel | 9100 | 350 | ||||
PFC4 | 632 | 304 Stainless Steel | 10300 | 400 | ||||
PFC4 | 832 | 304 Stainless Steel | 10800 | 450 | ||||
PFC4 | 032 | 304 Stainless Steel | 11800 | 550 |
TYPE AND SIZE | THICKNESS CODE | TEST SHEET MATERIAL | INSTALLATION (kN) | PUSHOUT OF PANEL 2 (N) | ||||
---|---|---|---|---|---|---|---|---|
SFP-3 | 1.0 | Stainless Steel | 13.5 | 620 | ||||
SFP-3 | 1.2 | Stainless Steel | 20 | 830 | ||||
SFP-3 | 1.6 | Stainless Steel | 22 | 1500 | ||||
SFP-5 | 1.0 | Stainless Steel | 18 | 990 | ||||
SFP-5 | 1.2 | Stainless Steel | 27 | 1158 | ||||
SFP-5 | 1.6 | Stainless Steel | 33 | 3117 |
TYPE AND SIZE | THICKNESS CODE | TEST SHEET MATERIAL | INSTALLATION (lbs.) | PUSHOUT OF PANEL 2 (lbs.) | ||||
---|---|---|---|---|---|---|---|---|
SFP-3 | 1.0 | Stainless Steel | 3000 | 140 | ||||
SFP-3 | 1.2 | Stainless Steel | 4500 | 186 | ||||
SFP-3 | 1.6 | Stainless Steel | 5000 | 340 | ||||
SFP-5 | 1.0 | Stainless Steel | 4000 | 222 | ||||
SFP-5 | 1.2 | Stainless Steel | 6000 | 260 | ||||
SFP-5 | 1.6 | Stainless Steel | 7500 | 701 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL-THRU (N) | |
---|---|---|---|---|---|---|---|---|
SGPC | M2.5 | 0.67 | Single Sheet of 1 mm 300 Series Stainless Steel | 20.1 | 2546 | 0.86 | 2561 | |
SGPC | M3 | 0.9 | Single Sheet of 1 mm 300 Series Stainless Steel | 21.8 | 2051 | 1.35 | 2851 | |
SGPC | M4 | 2.5 | Single Sheet of 1 mm 300 Series Stainless Steel | 28.5 | 2396 | 2.66 | 4000 | |
SGPC | M5 | 3.3 | Single Sheet of 1 mm 300 Series Stainless Steel | 35.6 | 3200 | 5.96 | 4284 | |
SGPC | M6 | 3.3 | Single Sheet of 1 mm 300 Series Stainless Steel | 42.3 | 3262 | 9.19 | 6311 |
TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL-THRU (lbs.) | |
---|---|---|---|---|---|---|---|---|
SGPC | 256 | 3.7 | Single Sheet of .039″ 300 Series Stainless Steel | 4000 | 425 | 5.2 | 415 | |
SGPC | 440 | 6 | Single Sheet of .039″ 300 Series Stainless Steel | 5000 | 450 | 8 | 512 | |
SGPC | 632 | 12 | Single Sheet of .039″ 300 Series Stainless Steel | 5500 | 460 | 15.8 | 811 | |
SGPC | 832 | 20 | Single Sheet of .039″ 300 Series Stainless Steel | 6500 | 480 | 29.3 | 1133 | |
SGPC | 032 | 25 | Single Sheet of .039″ 300 Series Stainless Steel | 7300 | 545 | 42.8 | 1273 | |
SGPC | 0420 | 45 | Single Sheet of .039″ 300 Series Stainless Steel | 10000 | 565 | 76.7 | 1721 |
TYPE | THREAD CODE | MAX. NUT TIGHTENING TORQUE (N•m) | TEST SHEET MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | TENSILE STRENGTH (kN) | TEST BUSHING HOLE SIZE PULL THRU SIZE TESTS (mm) |
---|---|---|---|---|---|---|---|---|---|
SMPP | M2.5 | 1.05 | 0.7 mm 304 Stainless Steel | 89 | 20 | 200 | 1.35 | 3.05 | 3 |
SMPP | M3 | 1.5 | 0.7 mm 304 Stainless Steel | 89 | 20 | 300 | 1.85 | 3.63 | 3.5 |
SMPP | M3.5 | 2.1 | 0.7 mm 304 Stainless Steel | 89 | 27 | 300 | 1.9 | 4.25 | 4 |
TYPE | THREAD CODE | MAX. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | TENSILE STRENGTH (lbs.) | TEST BUSHING HOLE SIZE PULL THRU SIZE TESTS (in.) |
---|---|---|---|---|---|---|---|---|---|
SMPP | 256 | 7.5 | .029″ 304 Stainless Steel | 89 | 4500 | 50 | 10 | 640 | 0.104 |
SMPP | 440 | 13 | .029″ 304 Stainless Steel | 89 | 4500 | 75 | 15 | 850 | 0.112 |
SMPP | 632 | 20 | .029″ 304 Stainless Steel | 89 | 6000 | 75 | 20 | 1020 | 0.138 |
TYPE | THREAD CODE | MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (in. lbs.) | TEST SHEET MATERIAL | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N-m) | PULL-THRU (N) |
---|---|---|---|---|---|---|---|
SO4, BSO4 | M3 | 0.55 | 1.3 mm 300 Series Stainless Steel | 24.5 | 1493 | 2.36 | 2650 |
SO4, BSO4 | 3.5 M3 | 0.55 | 1.3 mm 300 Series Stainless Steel | 42.3 | 2877 | 3.06 | 3025 |
SO4, BSO4 | M3.5 | 0.91 | 1.3 mm 300 Series Stainless Steel | 42.3 | 2877 | 3.06 | 3025 |
SO4, BSO4 | M4 | 2 | 1.3 mm 300 Series Stainless Steel | 46.7 | 4003 | 8.89 | 6458 |
SO4, BSO4 | M5 | 3.6 | 1.3 mm 300 Series Stainless Steel | 46.7 | 4003 | 8.89 | 6226 |
TYPE | THREAD CODE | MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (in. lbs.) | TEST SHEET MATERIAL | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL-THRU (lbs.) |
---|---|---|---|---|---|---|---|
SO4, BSO4 | 440 | 4.75 | .050″ 300 Series Stainless Steel | 5500 | 336 | 17 | 680 |
SO4, BSO4 | 6440 | 4.75 | .050″ 300 Series Stainless Steel | 9500 | 647 | 30 | 680 |
SO4, BSO4 | 632 | 8.75 | .050″ 300 Series Stainless Steel | 9500 | 647 | 30 | 680 |
SO4, BSO4 | 8632 | 8.75 | .050″ 300 Series Stainless Steel | 10500 | 900 | 71 | 1392 |
SO4, BSO4 | 832 | 18 | .050″ 300 Series Stainless Steel | 10500 | 900 | 71 | 1517 |
SO4, BSO4 | 032 | 32 | .050″ 300 Series Stainless Steel | 10500 | 900 | 71 | 1368 |
TYPE | THREAD CODE | SHANK CODE | TEST SHEET MATERIAL | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | |
---|---|---|---|---|---|---|---|
SP | M2 | 1 | 304 Stainless Steel | 40 | 725 | 1.92 | |
SP | M2 | 2 | 304 Stainless Steel | 44.5 | 1290 | 2.03 | |
SP | M2.5 | 0 | 304 Stainless Steel | 35.6 | 575 | 1.58 | |
SP | M2.5 | 1 | 304 Stainless Steel | 40 | 725 | 1.92 | |
SP | M2.5 | 2 | 304 Stainless Steel | 44.5 | 1290 | 2.03 | |
SP | M3 | 0 | 304 Stainless Steel | 35.6 | 575 | 1.58 | |
SP | M3 | 1 | 304 Stainless Steel | 40 | 725 | 1.92 | |
SP | M3 | 2 | 304 Stainless Steel | 44.5 | 1290 | 2.03 | |
SP | M4 | 0 | 304 Stainless Steel | 40 | 645 | 3.38 | |
SP | M4 | 1 | 304 Stainless Steel | 44.5 | 800 | 4.18 | |
SP | M4 | 2 | 304 Stainless Steel | 49 | 1600 | 5.08 | |
SP | M5 | 0 | 304 Stainless Steel | 42.3 | 800 | 3.95 | |
SP | M5 | 1 | 304 Stainless Steel | 46.7 | 1025 | 5.08 | |
SP | M5 | 2 | 304 Stainless Steel | 51.2 | 1775 | 6.77 | |
SP | M6 | 1 | 304 Stainless Steel | 60 | 2000 | 17 | |
SP | M6 | 2 | 304 Stainless Steel | 60 | 2600 | 19 | |
SP | M8 | 1 | 304 Stainless Steel | 66 | 2100 | 19 | |
SP | M8 | 2 | 304 Stainless Steel | 80 | 4500 | 23 | |
SP | M10 | 1 | 304 Stainless Steel | 80 | 2150 | 38 |
TYPE | THREAD CODE | SHANK CODE | TEST SHEET MATERIAL | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | |
---|---|---|---|---|---|---|---|
SP | 256 | 0 | 304 Stainless Steel | 8000 | 130 | 14 | |
SP | 256 | 1 | 304 Stainless Steel | 9000 | 165 | 17 | |
SP | 256 | 2 | 304 Stainless Steel | 10000 | 290 | 18 | |
SP | 440 | 0 | 304 Stainless Steel | 8000 | 130 | 14 | |
SP | 440 | 1 | 304 Stainless Steel | 9000 | 165 | 17 | |
SP | 440 | 2 | 304 Stainless Steel | 10000 | 290 | 18 | |
SP | 632 | 0 | 304 Stainless Steel | 8500 | 140 | 18 | |
SP | 632 | 1 | 304 Stainless Steel | 9500 | 170 | 24 | |
SP | 632 | 2 | 304 Stainless Steel | 10500 | 340 | 28 | |
SP | 832 | 0 | 304 Stainless Steel | 9000 | 145 | 30 | |
SP | 832 | 1 | 304 Stainless Steel | 10000 | 180 | 37 | |
SP | 832 | 2 | 304 Stainless Steel | 11000 | 360 | 45 | |
SP | 024/032 | 0 | 304 Stainless Steel | 9500 | 180 | 35 | |
SP | 024/032 | 1 | 304 Stainless Steel | 10500 | 230 | 45 | |
SP | 024/032 | 2 | 304 Stainless Steel | 11500 | 400 | 60 | |
SP | 0420 | 1 | 304 Stainless Steel | 13500 | 450 | 150 | |
SP | 0420 | 2 | 304 Stainless Steel | 13500 | 600 | 170 | |
SP | 0518 | 1 | 304 Stainless Steel | 14800 | 470 | 170 | |
SP | 0518 | 2 | 304 Stainless Steel | 14800 | 750 | 250 | |
SP | 0524 | 1 | 304 Stainless Steel | 14800 | 470 | 170 | |
SP | 0524 | 2 | 304 Stainless Steel | 14800 | 750 | 250 | |
SP | 0616/0624 | 1 | 304 Stainless Steel | 16000 | 600 | 300 | |
SP | 0616/0624 | 2 | 304 Stainless Steel | 20000 | 700 | 370 |
TYPE | PIN DIA. CODE | TEST SHEET MATERIAL | INSTALLATION (kN) | PUSHOUT (N) | ||||
---|---|---|---|---|---|---|---|---|
TP4 | 3MM | 300 Series Stainless Steel | 35 | 1556 | ||||
TP4 | 4MM | 300 Series Stainless Steel | 45 | 2335 | ||||
TP4 | 5MM | 300 Series Stainless Steel | 54 | 2535 | ||||
TP4 | 6MM | 300 Series Stainless Steel | 60 | 2891 |
TYPE | PIN DIA. CODE | TEST SHEET MATERIAL | INSTALLATION (lbs.) | PUSHOUT (lbs.) | ||||
---|---|---|---|---|---|---|---|---|
TP4 | 125 | 300 Series Stainless Steel | 8000 | 350 | </td
LoginRegister |