Our Product

CDS-100

SKU CDS-100 Category Tag

microPEM® ClampDisk® Fastener – Type CDS™

The microPEM® ClampDisk® fastener presses straight onto a 1 mm pin to replace threads, adhesive, rivets and other small fasteners. The upward flanges of the disk grip onto the pin and prevent push-off while the downward flanges flex and generate clamp load. Clamp load generation Simple installation Removability Works with multiple panels of any material Limited installation stress to assemble Tamper resistant

Available on Pre-order
L/T "4 - 8 Weeks"

Login/Register to order!

Ask for quote
Fastener Material

,

Standard Finish

,

For use with

Product Category

CADPartID

Thread Type

Application Type

,

Base Panel Material

Brand

Fastener Characteristics

,

Industry

,

PEM Product Family

Product Type

Technology Type

ClampDisk® Thickness (T)_mm

Inside Diameter (C)_mm

Outside Diameter (E)_mm

Pin Length_mm

Resources

PEM® Consumer Electronics Fastening Design Standards
Catalog
Go to PEM® Consumer Electronics Fastening Design Standards
AE Busbar Data Sheet
Tech Sheet
Go to AE Busbar Data Sheet
Electrical Applications Data Sheet
Tech Sheet
Go to Electrical Applications Data Sheet
MPF – microPEM® Fasteners
Datasheet
Go to MPF – microPEM® Fasteners

Installation & Performance Data

mpf-cds-fasteners-metric
TYPE TEST PIN MATERIAL INSTALLATION (kN) PULL-OFF (N) CLAMP LOAD (N)
CDS-100 6061-T6 Aluminum 0.33 18.1 7
mpf-mpp-pins-metric
TYPE PIN DIAMETER CODE TEST SHEET THICKNESS INSTALLATION (kN) PUSHOUT (N)
MPP 1MM 0.5mm Stainless Steel HRB 88 10 320
MPP 1.5MM 0.5mm Stainless Steel HRB 88 12 760
MPP 2MM 0.5mm Stainless Steel HRB 88 18 860
mpf-ms04-standoffs-metric
TYPE THREAD CODE MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (N•m)) SHEET THICKNESS (mm) TEST SHEET MATERIAL INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m) PULL-THRU (N)
MSO4 M1 0.019 0.3 300 Series Stainless Steel 11.1 150 0.15 350
MSO4 M1 0.019 0.43 300 Series Stainless Steel 11.1 200 0.25 350
MSO4 M1.2 0.036 0.3 300 Series Stainless Steel 11.1 150 0.15 350
MSO4 M1.2 0.036 0.43 300 Series Stainless Steel 11.1 200 0.25 350
MSO4 M1.4 0.057 0.3 300 Series Stainless Steel 11.1 150 0.15 350
MSO4 M1.4 0.057 0.43 300 Series Stainless Steel 11.1 200 0.25 350
MSO4 M1.6 0.084 0.3 300 Series Stainless Steel 11.1 150 0.15 350
MSO4 M1.6 0.084 0.43 300 Series Stainless Steel 11.1 200 0.25 350
MSO4 M2 0.175 0.3 300 Series Stainless Steel 11.1 150 0.25 500
MSO4 M2 0.175 0.43 300 Series Stainless Steel 11.1 200 0.3 500
mpf-ms04-standoffs-unified
TYPE THREAD CODE MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (in. lbs.) SHEET THICKNESS (in.) TEST SHEET MATERIAL INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.) PULL-THRU (lbs.)
MSO4 080 0.65 0.013 300 Series Stainless Steel 2500 33 1.3 78
MSO4 080 .65 0.017 300 Series Stainless Steel 2500 45 2.2 78
MSO4 256 1.3 0.013 300 Series Stainless Steel 2500 33 2.2 110
MSO4 256 1.3 0.017 300 Series Stainless Steel 2500 45 2.6 110
mpf-msia-msib-inserts-metric
TYPE THREAD CODE LENGTH CODE TEST SHEET THICKNESS & MATERIAL PULLOUT (N) TORQUE-OUT (N•cm)
MSIA/MSIB M1 100 ABS 50 3.5
MSIA/MSIB M1 250 ABS 150 10
MSIA/MSIB M1.2 100 ABS 50 3.5
MSIA/MSIB M1.2 250 ABS 150 10
MSIA/MSIB M1.4 150 ABS 100 15
MSIA/MSIB M1.4 300 ABS 330 30
MSIA/MSIB M1.6 150 ABS 100 15
MSIA/MSIB M1.6 300 ABS 330 30
MSIA/MSIB M2 300 ABS 335 35
MSIA/MSIB M2 400 ABS 470 40
MSIA/MSIB M1 100 Polycarbonate 50 4.5
MSIA/MSIB M1 250 Polycarbonate 200 12
MSIA/MSIB M1.2 100 Polycarbonate 50 4.5
MSIA/MSIB M1.2 250 Polycarbonate 200 12
MSIA/MSIB M1.4 150 Polycarbonate 140 15
MSIA/MSIB M1.4 300 Polycarbonate 400 30
MSIA/MSIB M1.6 150 Polycarbonate 140 15
MSIA/MSIB M1.6 300 Polycarbonate 400 30
MSIA/MSIB M2 300 Polycarbonate 410 33
MSIA/MSIB M2 400 Polycarbonate 595 35
mpf-msofs-standoffs-metric
TYPE THREAD CODE MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (N•m) TEST SHEET THICKNESS & MATERIAL INSTALLATION (kN) PUSHOUT (N) TORQUE-OUT (N•m)
MSOFS M1 0.019 0.2 mm 300 Series Stainless Steel 6.67 311 0.146
MSOFS M1.2 0.036 0.2 mm 300 Series Stainless Steel 6.67 311 0.146
MSOFS M1.4 0.057 0.2 mm 300 Series Stainless Steel 6.67 311 0.146
MSOFS M1.6 0.084 0.2 mm 300 Series Stainless Steel 8 406 0.146
MSOFS M2 0.175 0.2 mm 300 Series Stainless Steel 8 406 0.146
mpf-msofs-standoffs-unified
TYPE THREAD CODE MAX. REC. TIGHTENING TORQUE FOR MATING SCREW (in. lbs.) TEST SHEET THICKNESS & MATERIAL INSTALLATION (lbs.) PUSHOUT (lbs.) TORQUE-OUT (in. lbs.)
MSOFS 080 0.65 .008″ 300 Series Stainless Steel 1500 69.8 1.29
MSOFS 256 1.3 .008″ 300 Series Stainless Steel 1800 91.2 1.29
mpf-smtso-fasteners-metric
TYPE SHEET THICKNESS & MATERIAL PUSHOUT (N) TORQUE-OUT (N•m)
SMTSO-080 .062″ Single Layer RF-4 378.7 0.56
SMTSO-M1 .062″ Single Layer RF-4 378.7 0.56
SMTSO-M1.2 .062″ Single Layer RF-4 378.7 0.56
SMTSO-M1.4 .062″ Single Layer RF-4 378.7 0.56
SMTSO-M1.6 .062″ Single Layer RF-4 378.7 0.56
mpf-smtso-fasteners-unified
TYPE SHEET THICKNESS & MATERIAL PUSHOUT (lbs.) TORQUE-OUT (in. lbs.)
SMTSO-080 .062″ Single Layer RF-4 85.1 4.94
SMTSO-M1 .062″ Single Layer RF-4 85.1 4.94
SMTSO-M1.2 .062″ Single Layer RF-4 85.1 4.94
SMTSO-M1.4 .062″ Single Layer RF-4 85.1 4.94
SMTSO-M1.6 .062″ Single Layer RF-4 85.1 4.94
mpf-t4-fasteners-metric
TYPE SHEET MATERIAL INSTALLATION (N) PULLOUT (N)
T4-10-025 300 Series Stainless Steel 2020 200
T4-10-050 300 Series Stainless Steel 2020 200
mpf-t4-fasteners-unified
TYPE SHEET MATERIAL INSTALLATION (lbs.) PULLOUT (lbs.)
T4-10-025 300 Series Stainless Steel 455 45
T4-10-050 300 Series Stainless Steel 455 45
mpf-ta-fasteners-metric
TYPE SHEET MATERIAL INSTALLATION (kN) PULLOUT (N)
TA-10-025 5052-H34 Aluminum 820 80
TA-10-050 5052-H34 Aluminum 820 80
TA-10-075 5052-H34 Aluminum 820 80
mpf-ta-fasteners-unified
TYPE SHEET MATERIAL INSTALLATION (lbs.) PULLOUT (lbs.)
TA-10-025 5052-H34 Aluminum 185 18
TA-10-050 5052-H34 Aluminum 185 18
TA-10-075 5052-H34 Aluminum 185 18
mpf-tfa-fasteners-metric
TYPE SHEET MATERIAL INSTALLATION (N) PULLOUT (N)
TFA-10-025 5052-H34 Aluminum 450 40
TFA-10-035 5052-H34 Aluminum 450 40
TFA-10-045 5052-H34 Aluminum 450 40
TFA-10-055 5052-H34 Aluminum 450 40
mpf-tfa-fasteners-unified
TYPE SHEET MATERIAL INSTALLATION (lbs.) PULLOUT (lbs.)
TFA-10-025 5052-H34 Aluminum 101 9
TFA-10-035 5052-H34 Aluminum 101 9
TFA-10-045 5052-H34 Aluminum 101 9
TFA-10-055 5052-H34 Aluminum 101 9
mpf-tka-tk4-pins-metric
TYPE TEST BASE PANEL MATERIAL DEPTH OF ENGAGEMENT (mm) INSTALLATION (N) PULLOUT (N)
TKA-10 ABS 0.8 133 9
TKA-10 ABS 1 133 14
TKA-10 ABS 1.3 133 19
TKA-10 ABS 1.5 178 24
TKA-10 ABS 1.8 178 31
TKA-10 ABS 2 222 35
TKA-10 ABS 2.3 222 41
TKA-10 ABS 2.8 245 53
TKA-10 Polycarbonate 0.8 222 25
TKA-10 Polycarbonate 1 267 37
TKA-10 Polycarbonate 1.3 267 53
TKA-10 Polycarbonate 1.5 311 68
TKA-10 Polycarbonate 1.8 334 86
TKA-10 Polycarbonate 2 378 98
TKA-10 Polycarbonate 2.3 400 113
TK4-10 Polycarbonate 2.8 423 146
TK4-10 Magnesium Casting (AZ91D) 0.8 445 29
TK4-10 Magnesium Casting (AZ91D) 1 489 43
TK4-10 Magnesium Casting (AZ91D) 1.3 534 61
TK4-10 Magnesium Casting (AZ91D) 1.5 578 78
TK4-10 Magnesium Casting (AZ91D) 1.8 623 99
TK4-10 Magnesium Casting (AZ91D) 2 667 113
TK4-10 Magnesium Casting (AZ91D) 2.3 712 131
TK4-10 Magnesium Casting (AZ91D) 2.8 801 169
mpf-tka-tk4-pins-unified
TYPE TEST BASE PANEL MATERIAL DEPTH OF ENGAGEMENT (in.) INSTALLATION (lbs.) PULLOUT (lbs.)
TKA-10 ABS 0.0315 30 2
TKA-10 ABS 0.0394 30 3
TKA-10 ABS 0.0492 30 4
TKA-10 ABS 0.0590 40 6
TKA-10 ABS 0.0708 40 7
TKA-10 ABS 0.0787 50 8
TKA-10 ABS 0.0886 50 9
TKA-10 ABS 0.1102 55 12
TKA-10 Polycarbonate 0.0315 50 6
TKA-10 Polycarbonate 0.0394 60 8
TKA-10 Polycarbonate 0.0492 60 12
TKA-10 Polycarbonate 0.0590 70 15
TKA-10 Polycarbonate 0.0708 75 19
TKA-10 Polycarbonate 0.0787 85 22
TKA-10 Polycarbonate 0.0886 90 25
TK4-10 Polycarbonate 0.1102 95 33
TK4-10 Magnesium Casting (AZ91D) 0.0315 100 7
TK4-10 Magnesium Casting (AZ91D) 0.0394 110 10
TK4-10 Magnesium Casting (AZ91D) 0.0492 120 14
TK4-10 Magnesium Casting (AZ91D) 0.0590 130 18
TK4-10 Magnesium Casting (AZ91D) 0.0708 140 22
TK4-10 Magnesium Casting (AZ91D) 0.0787 150 25
TK4-10 Magnesium Casting (AZ91D) 0.0886 160 29
TK4-10 Magnesium Casting (AZ91D) 0.1102 180 38
mpf-ts4-fasteners-metric
TYPE TESTED TOP SHEET THICKNESS SHEET MATERIAL INSTALLATION (N) PULLOUT (N) TORQUE TO REMOVE (N•cm)
TS4-10-025 0.254 mm / .01″ 5052-H34 Aluminum HRB 63 / HB 114 556 80 3.3
TS4-10-050 0.533 mm / .021″ 5052-H34 Aluminum HRB 63 / HB 114 556 80 3.3
TS4-10-025 0.254 mm / .01″ 304 Stainless Steel HRB 89/HB 187 1423 125 4.6
TS4-10-050 0.533 mm / .021″ 304 Stainless Steel HRB 89/HB 187 1423 125 4.6
mpf-ts4-fasteners-unified
TYPE TESTED TOP SHEET THICKNESS SHEET MATERIAL INSTALLATION (lbs.) PULLOUT (lbs.) TORQUE TO REMOVE (in. oz.)
TS4-10-025 0.254 mm / .01″ 5052-H34 Aluminum HRB 63 / HB 114 125 18 4.7
TS4-10-050 0.533 mm / .021″ 5052-H34 Aluminum HRB 63 / HB 114 125 18 4.7
TS4-10-025 0.254 mm / .01″ 304 Stainless Steel HRB 89/HB 187 320 28 6.5
TS4-10-050 0.533 mm / .021″ 304 Stainless Steel HRB 89/HB 187 320 28 6.5
Datasheet