我們的產品
FH-3 MM-25ZC
壓鉚銷 – FH、FHS、FHA 型
PEM® 自鉚螺柱的安裝方法是將其放入板材中適當尺寸的孔中，並使用任何標準壓力機擠壓到位。擠壓動作將螺柱的頭部嵌入板材中。頭部移動的金屬在肋周圍平穩、均勻地流動並進入環形凹槽，形成沖洗頭組件，並以高扭矩輸出和推出阻力將螺柱牢固地鎖定到板材中。 strong> FH（平頭）螺柱有鋁、鋼或不鏽鋼材質可供選擇。特殊訂單還可提供無螺紋的產品。 ) ) 80 或更低，HB（布氏硬度）150 或更低。布氏硬度）125
FHA型建議用於HRB（洛氏「B」標度）50以下和HB（布氏硬度）82以下的鋁板。 /li>
分區>
Available on Pre-order
L/T "4 - 8 Weeks"
登入/註冊即可訂購！
| 緊固件材質 | |
|---|---|
| Optional Finish | |
| 用於板材硬度 | |
| 長度代碼 | |
| 產品分類 | |
| CAD供應商 | |
| 卡帕迪 | |
| 應用程式類型 | Aerospace, Automotive, Automotive Electronics, Commercial Vehicles, Datacom, Electric Vehicle Chargers, Electric Vehicles, Electronics, Industrial, Manufacturing & Sheet Metal Fabrication, Marine, Medical, Telecom |
| 基板材料 | |
| 品牌 | |
| 緊固件特性 | |
| 產業 | Automotive, Automotive Electronics, Datacom & Telecom, Electic Vehicles, Industrial & Commercial, Medical |
| 安裝設備 | |
| PEM 產品系列 | |
| P Nominal Pin Diameter | |
| 產品類型 | |
| 技術類型 | |
| 單位（公制/統一） | |
| H ± 0.4_mm | |
| Hole Size in Sheet + 0.08_mm | |
| L Len Pm 015in Or 4mm | |
| Min. Dist. Hole C/L to Edge_ | |
| Min. Sheet Thickness_mm | |
| Pin Dia. Code | |
| S Max._mm |
Resources
Catalog
Tech SheetWhite Paper
AnimationVideo
Installation & Performance Data
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL THRU (N) |
|---|---|---|---|---|---|---|---|---|
| FH | M2.5 | 0.78 | 1.6 mm Aluminum | 29 | 8.9 | 465 | 1.0 | 2600 |
| FHS | M2.5 | 0.48 | 1.6 mm Aluminum | 29 | 11.6 | 465 | 0.8 | 1820 |
| FH | M3 | 1.1 | 1.6 mm Aluminum | 29 | 12.9 | 600 | 1.7 | 3150 |
| FHS | M3 | 0.81 | 1.6 mm Aluminum | 29 | 12.9 | 600 | 1.3 | 2570 |
| FH | M3.5 | 1.6 | 1.6 mm Aluminum | 29 | 15.6 | 800 | 1.7 | 3780 |
| FHS | M3.5 | 1.3 | 1.6 mm Aluminum | 29 | 15.6 | 800 | 1.7 | 3445 |
| FH | M4 | 2.1 | 1.6 mm Aluminum | 29 | 20 | 975 | 2.9 | 4448 |
| FHS | M4 | 1.8 | 1.6 mm Aluminum | 29 | 22.3 | 975 | 2.9 | 4180 |
| FH | M5 | 3.1 | 1.6 mm Aluminum | 29 | 24.5 | 1070 | 3.5 | 5170 |
| FHS | M5 | 2.5 | 1.6 mm Aluminum | 29 | 24.5 | 1070 | 3.5 | 4760 |
| FH | M6 | 7.3 | 2.4 mm Aluminum | 28 | 28.9 | 1660 | 7.3 | 10200 |
| FHS | M6 | 5.7 | 2.4 mm Aluminum | 28 | 28.9 | 1660 | 7.3 | 9090 |
| FH | M8 | 10 | 2.4 mm Aluminum | 28 | 29.8 | 1910 | 11.3 | 10500 |
| FHS | M8 | 8 | 2.4 mm Aluminum | 28 | 29.8 | 1910 | 11.3 | 9540 |
| FH | M2.5 | 0.84 | 1.5 mm Steel | 59 | 11.1 | 740 | 1.0 | 2800 |
| FHS | M2.5 | 0.48 | 1.5 mm Steel | 59 | 13.8 | 740 | 0.8 | 1820 |
| FH | M3 | 1.4 | 1.5 mm Steel | 59 | 14.7 | 820 | 1.7 | 3840 |
| FHS | M3 | 0.77 | 1.5 mm Steel | 59 | 14.7 | 820 | 1.3 | 2440 |
| FH | M3.5 | 1.6 | 1.5 mm Steel | 59 | 22.3 | 1335 | 2.8 | 3780 |
| FHS | M3.5 | 1.3 | 1.5 mm Steel | 59 | 22.3 | 1335 | 2.0 | 3445 |
| FH | M4 | 2.7 | 1.5 mm Steel | 59 | 28.9 | 1780 | 4.2 | 5650 |
| FHS | M4 | 2 | 1.5 mm Steel | 59 | 26.7 | 1780 | 2.9 | 4775 |
| FH | M5 | 3.8 | 1.5 mm Steel | 59 | 33.4 | 2000 | 6.5 | 6270 |
| FHS | M5 | 3.2 | 1.5 mm Steel | 59 | 32.5 | 2000 | 6.3 | 6000 |
| FH | M6 | 8.1 | 2.2 mm Steel | 46 | 44.5 | 2560 | 11.3 | 11300 |
| FHS | M6 | 6.7 | 2.2 mm Steel | 46 | 44.5 | 2560 | 10.1 | 10600 |
| FH | M8 | 15 | 2.4 mm Steel | 46 | 44.5 | 2890 | 19.2 | 15450 |
| FHS | M8 | 11 | 2.4 mm Steel | 46 | 49.8 | 2890 | 17.5 | 13630 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL THRU (lbs.) |
|---|---|---|---|---|---|---|---|---|
| FH | 256 | 4.4 | .062″ Aluminum | 29 | 2000 | 100 | 5 | 425 |
| FHS | 256 | 2.7 | .062″ Aluminum | 29 | 2000 | 100 | 4.5 | 300 |
| FH | 440 | 8.7 | .064″ Aluminum | 29 | 3800 | 170 | 10 | 650 |
| FHS | 440 | 5.9 | .064″ Aluminum | 29 | 3200 | 170 | 8 | 500 |
| FH | 632 | 14 | .064″ Aluminum | 29 | 3800 | 180 | 17 | 850 |
| FHS | 632 | 11 | .064″ Aluminum | 29 | 3500 | 180 | 16 | 775 |
| FH | 832 | 20 | .064″ Aluminum | 29 | 4800 | 220 | 28 | 1000 |
| FHS | 832 | 16 | .064″ Aluminum | 29 | 4500 | 220 | 28 | 940 |
| FH | 024/032 | 28 | .064″ Aluminum | 29 | 5500 | 270 | 30 | 1220 |
| FHS | 024/032 | 24 | .064″ Aluminum | 29 | 5500 | 270 | 30 | 1220 |
| FH | 0420 | 69 | .093″ Aluminum | 28 | 6500 | 310 | 65 | 2300 |
| FHS | 0420 | 55 | .093″ Aluminum | 28 | 6500 | 310 | 65 | 2100 |
| FH | 0518 | 85 | .093″ Aluminum | 28 | 6500 | 430 | 100 | 2260 |
| FHS | 0518 | 74 | .093″ Aluminum | 28 | 6700 | 430 | 100 | 2260 |
| FH | 256 | 4.4 | .060″ Steel | 59 | 2500 | 180 | 5 | 425 |
| FHS | 256 | 2.7 | .060″ Steel | 59 | 2500 | 180 | 4.5 | 300 |
| FH | 440 | 8.7 | .060″ Steel | 59 | 4300 | 275 | 10 | 650 |
| FHS | 440 | 5.9 | .060″ Steel | 59 | 4700 | 275 | 8 | 500 |
| FH | 632 | 14 | .060″ Steel | 59 | 4700 | 300 | 20 | 850 |
| FHS | 632 | 11 | .060″ Steel | 59 | 5000 | 300 | 16 | 775 |
| FH | 832 | 25 | .060″ Steel | 59 | 6800 | 375 | 40 | 1270 |
| FHS | 832 | 19 | .060″ Steel | 59 | 5500 | 375 | 28 | 1130 |
| FH | 024/032 | 32 | .060″ Steel | 59 | 7500 | 450 | 60 | 1410 |
| FHS | 024/032 | 28 | .060″ Steel | 59 | 6800 | 450 | 50 | 1410 |
| FH | 0420 | 77 | .088″ Steel | 46 | 9500 | 575 | 100 | 2550 |
| FHS | 0420 | 67 | .088″ Steel | 46 | 10000 | 575 | 100 | 2550 |
| FH | 0518 | 130 | .093″ Steel | 46 | 10000 | 650 | 175 | 3475 |
| FHS | 0518 | 102 | .093″ Steel | 46 | 11200 | 650 | 175 | 3120 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL THRU (N) |
|---|---|---|---|---|---|---|---|---|
| FH4 | M3 | 1.3 | 1.5 mm Stainless Steel | 87 | 40 | 2220 | 1.8 | 3500 |
| FH4 | M4 | 3.8 | 1.5 mm Stainless Steel | 86 | 50 | 3210 | 6.5 | 8000 |
| FH4 | M5 | 6 | 1.5 mm Stainless Steel | 86 | 53 | 3560 | 10.7 | 10000 |
| FH4 | M6 | 11 | 1.6 mm Stainless Steel | 88 | 100 | 4200 | 15.9 | 14900 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL THRU (lbs.) |
|---|---|---|---|---|---|---|---|---|
| FH4 | 440 | 11 | .060″ Stainless Steel | 87 | 9000 | 450 | 16 | 800 |
| FH4 | 632 | 22 | .060″ Stainless Steel | 87 | 9500 | 540 | 27 | 1350 |
| FH4 | 832 | 35 | .060″ Stainless Steel | 86 | 11200 | 780 | 58 | 1800 |
| FH4 | 032 | 51 | .060″ Stainless Steel | 86 | 12000 | 800 | 95 | 2250 |
| FH4 | 0420 | 117 | .062″ Stainless Steel | 88 | 23000 | 1600 | 156 | 3900 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HR15T | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL THRU (N) |
|---|---|---|---|---|---|---|---|---|
| FHA | M3 | 0.54 | 1.55 mm 5052-H34 Aluminum | 74 | 10.7 | 575 | 0.5 | 1500 |
| FHA | M4 | 0.96 | 1.55 mm 5052-H34 Aluminum | 75 | 14.3 | 775 | 1.35 | 2000 |
| FHA | M5 | 1.5 | 1.55 mm 5052-H34 Aluminum | 75 | 15.2 | 900 | 2.6 | 2500 |
| FHA | M6 | 3.2 | 1.6 mm 5052-H34 Aluminum | 75 | 24.5 | 1500 | 5.3 | 4500 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HR15T | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL THRU (lbs.) |
|---|---|---|---|---|---|---|---|---|
| FHA | 440 | 3.6 | .061″ 5052-H34 Aluminum | 75 | 2500 | 155 | 4 | 270 |
| FHA | 632 | 6.3 | .061″ 5052-H34 Aluminum | 75 | 2600 | 180 | 8 | 380 |
| FHA | 832 | 9.8 | .061″ 5052-H34 Aluminum | 73 | 3200 | 190 | 15 | 500 |
| FHA | 032 | 14 | .061″ 5052-H34 Aluminum | 75 | 3200 | 220 | 28 | 600 |
| FHA | 0420 | 32 | .062″ 5052-H34 Aluminum | 75 | 5500 | 300 | 55 | 1050 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL THRU (N) | PULL THRU TEST BUSHING HOLE SIZE (mm) |
|---|---|---|---|---|---|---|---|---|---|
| FHL, FHLS | M2.5 | 0.32 | 1.2 mm Aluminum | 33 | 3.1 | 285 | 0.55 | 1200 | 3 |
| FHL, FHLS | M3 | 0.41 | 1.2 mm Aluminum | 33 | 4.4 | 285 | 0.65 | 1300 | 3.5 |
| FHL, FHLS | M3.5 | 0.51 | 1.2 mm Aluminum | 33 | 4.4 | 290 | 0.76 | 1400 | 4 |
| FHL, FHLS | M4 | 0.65 | 1.2 mm Aluminum | 33 | 5.3 | 365 | 1.1 | 1550 | 4.5 |
| FHL, FHLS | M5 | 0.97 | 1.2 mm Aluminum | 33 | 11.1 | 530 | 2.2 | 1850 | 5.5 |
| FHL, FHLS | M2.5 | 0.59 | 1.1 mm Steel | 54 | 5.3 | 450 | 1.1 | 2250 | 3 |
| FHL, FHLS | M3 | 0.79 | 1.1 mm Steel | 54 | 5.3 | 475 | 1.25 | 2500 | 3.5 |
| FHL, FHLS | M3.5 | 1.03 | 1.1 mm Steel | 54 | 6.6 | 500 | 1.75 | 2800 | 4 |
| FHL, FHLS | M4 | 1.39 | 1.1 mm Steel | 54 | 6.6 | 550 | 2.1 | 3300 | 4.5 |
| FHL, FHLS | M5 | 1.97 | 1.1 mm Steel | 54 | 20 | 1000 | 4.4 | 3750 | 5.5 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL THRU (lbs.) | PULL THRU TEST BUSHING HOLE SIZE (in.) |
|---|---|---|---|---|---|---|---|---|---|
| FHL, FHLS | 256 | 2.1 | .047″ Aluminum | 33 | 700 | 55 | 4 | 230 | .106 |
| FHL, FHLS | 440 | 3.5 | .047″ Aluminum | 33 | 1000 | 60 | 5 | 300 | .132 |
| FHL, FHLS | 632 | 4.7 | .047″ Aluminum | 33 | 1000 | 65 | 6.5 | 325 | .158 |
| FHL, FHLS | 832 | 6 | .047″ Aluminum | 33 | 1200 | 80 | 9 | 350 | .184 |
| FHL, FHLS | 032 | 7.9 | .047″ Aluminum | 33 | 2500 | 115 | 18 | 395 | .210 |
| FHL, FHLS | 256 | 3.8 | .045″ Steel | 54 | 1200 | 85 | 8 | 425 | .106 |
| FHL, FHLS | 440 | 6.8 | .045″ Steel | 54 | 1200 | 105 | 11 | 580 | .132 |
| FHL, FHLS | 632 | 9 | .045″ Steel | 54 | 1500 | 110 | 15 | 650 | .158 |
| FHL, FHLS | 832 | 13 | .045″ Steel | 54 | 1500 | 125 | 18 | 740 | .184 |
| FHL, FHLS | 032 | 16 | .045″ Steel | 54 | 4500 | 210 | 38 | 800 | .210 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL THRU (N) |
|---|---|---|---|---|---|---|---|---|
| FHP | M3 | 1.3 | 2 mm Stainless Steel | 86 | 40 | 2500 | 1.6 | 3500 |
| FHP | M4 | 2.9 | 1.14 mm Stainless Steel | 86 | 50 | 3000 | 3.9 | 6000 |
| FHP | M5 | 4.4 | 1.14 mm Stainless Steel | 86 | 53 | 3560 | 7.35 | 7320 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | PULL THRU (lbs.) |
|---|---|---|---|---|---|---|---|---|
| FHP | 440 | 8.1 | .045″ Stainless Steel | 86 | 9000 | 520 | 10.6 | 605 |
| FHP | 632 | 16 | .045″ Stainless Steel | 86 | 9500 | 670 | 19.5 | 940 |
| FHP | 832 | 28 | .045″ Stainless Steel | 86 | 11200 | 785 | 37.5 | 1415 |
| FHP | 032 | 34 | .045″ Stainless Steel | 86 | 12000 | 800 | 59.5 | 1500 |
| TYPE | THREAD CODE | TEST SHEET THICKNESS & MATERIAL | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| FHX | X5 | 1.1 mm Steel HRB 58 / HB 104 | 24.9 | 1519 | 4.7 | |||||
| FHX | X5 | 1.2 mm Aluminum HRB 44 / HB 66 | 19.2 | 1070 | 3.2 | |||||
| FHX | X6 | 1.6 mm Steel HRB 58 / HB 104 | 35.6 | 2964 | 13.3 | |||||
| FHX | X6 | 1.6 mm Aluminum HRB 44 / HB 66 | 29.4 | 1623 | 7 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | TENSILE STRENGTH (kN) | PULL THRU (N) | PULL THRU TEST BUSHING HOLE SIZE (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| HFE | M5 | 5.8 | 1 mm Aluminum | 27 | 37.7 | 690 | 8.1 | 12.8 | 9.7 | 7.4 |
| HFE | M6 | 10 | 1 mm Aluminum | 27 | 39 | 750 | 11.8 | 18.1 | 14.2 | 8.2 |
| HFE | M8 | 24 | 1.5 mm Aluminum | 22 | 42 | 1230 | 23.5 | 32.9 | 25 | 10.3 |
| HFE | M5 | 6.4 | 1 mm Cold-rolled Steel | 67 | 51.1 | 1350 | 8.1 | 12.8 | 10.6 | 7.4 |
| HFE | M6 | 11 | 1 mm Cold-rolled Steel | 67 | 60 | 1400 | 14.4 | 18.1 | 15.5 | 8.2 |
| HFE | M8 | 26 | 1 mm Cold-rolled Steel | 65 | 71.1 | 2400 | 33.9 | 32.9 | 27.5 | 10.3 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (ft. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | TENSILE STRENGTH (lbs.) | PULL THRU (lbs.) | TEST BUSHING HOLE SIZE FOR PULL THRU TESTS (in.) |
|---|---|---|---|---|---|---|---|---|---|---|
| HFE | 032 | 3.6 | .040″ Aluminum | 27 | 7500 | 170 | 60 | 2400 | 1900 | .279 |
| HFE | 0420 | 8 | .040″ Aluminum | 27 | 8000 | 180 | 120 | 3820 | 3200 | .335 |
| HFE | 0518 | 19 | .060″ Aluminum | 22 | 9000 | 275 | 240 | 6280 | 6000 | .407 |
| HFE | 032 | 4.2 | .040″ Cold-rolled Steel | 67 | 9500 | 300 | 60 | 2400 | 2200 | .279 |
| HFE | 0420 | 9 | .040″ Cold-rolled Steel | 67 | 13500 | 340 | 130 | 3820 | 3600 | .335 |
| HFE | 0518 | 20 | .060″ Cold-rolled Steel | 65 | 15500 | 575 | 290 | 6280 | 6280 | .407 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TENSILE STRENTH (kN) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | ||
|---|---|---|---|---|---|---|---|---|---|---|
| HF109 | M5 | 10 | 14.8 | 1.2 mm HSLA Steel | 86.1 | 60.1 | 2084 | 9 | ||
| HF109 | M6 | 17 | 20.9 | 1.2 mm HSLA Steel | 85.6 | 90 | 2454 | 15.6 | ||
| HF109 | M8 | 41 | 38.1 | 1.5 mm HSLA Steel | 84 | 145 | 3026 | 38.4 | ||
| HF109 | M5 | 10 | 14.8 | 1 mm Cold-rolled Steel | 45.3 | 43.2 | 978 | 9 | ||
| HF109 | M6 | 17 | 20.9 | 1 mm Cold-rolled Steel | 45.5 | 60 | 1072 | 14.4 | ||
| HF109 | M8 | 41 | 38.1 | 1.5 mm Cold-rolled Steel | 55 | 85 | 1992 | 37.7 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (ft. lbs.) | TENSILE STRENTH (lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (ft. lbs.) | ||
|---|---|---|---|---|---|---|---|---|---|---|
| HFG8 | 032 | 6.4 | 3000 | .047″ HSLA Steel | 85.5 | 14000 | 483 | 6.2 | ||
| HFG8 | 0420 | 13 | 4750 | .047″ HSLA Steel | 85.7 | 21400 | 592 | 11.5 | ||
| HFG8 | 0518 | 28 | 7850 | .060″ HSLA Steel | 84.9 | 32600 | 667 | 25.6 | ||
| HFG8 | 032 | 6.4 | 3000 | 0.040″ Cold-rolled Steel | 45.0 | 9900 | 249 | 5.9 | ||
| HFG8 | 0420 | 13 | 4750 | 0.040″ Cold-rolled Steel | 45.0 | 14100 | 248 | 11.5 | ||
| HFG8 | 0518 | 28 | 7850 | 0.040″ Cold-rolled Steel | 55.2 | 19100 | 447 | 25.2 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | TENSILE STRENGTH (kN) | ||
|---|---|---|---|---|---|---|---|---|---|---|
| HFH | M5 | 7.7 | 1.5 mm Aluminum | 15 | 13 | 800 | 5.4 | 12.8 | ||
| HFH | M5 | 7.7 | 1.5 mm Steel | 65 | 26 | 1500 | 7.6 | 12.8 | ||
| HFHS | M5 | 3.8 | 1.62 mm Aluminum | 35 | 12.4 | 800 | 5.4 | 7.3 | ||
| HFHS | M5 | 3.8 | 1.47 mm Steel | 54 | 21.7 | 1500 | 6.4 | 7.3 | ||
| HFHB | M5 | 2.7 | 1.5 mm Copper CDA-110 | 28 | 15.6 | 1115 | 3.4 | 5.9 | ||
| HFH | M6 | 13 | 1.5 mm Aluminum | 43 | 29 | 1270 | 14 | 18.1 | ||
| HFH | M6 | 13 | 1.5 mm Steel | 59 | 33 | 1750 | 14 | 18.1 | ||
| HFHS | M6 | 6.5 | 1.62 mm Aluminum | 35 | 15.4 | 1270 | 11 | 10.3 | ||
| HFHS | M6 | 6.5 | 1.6 mm Steel | 45 | 24.6 | 1750 | 11 | 10.3 | ||
| HFHB | M6 | 4.5 | 1.5 mm Copper CDA-110 | 28 | 25.3 | 1600 | 6.7 | 8.3 | ||
| HFH | M8 | 32 | 2.3 mm Aluminum | 39 | 35.6 | 1700 | 30 | 32.9 | ||
| HFH | M8 | 32 | 2.3 mm Steel | 58 | 44.5 | 2200 | 30 | 32.9 | ||
| HFHS | M8 | 16 | 2.23 mm Aluminum | 44 | 24.4 | 1700 | 20 | 18.8 | ||
| HFHS | M8 | 16 | 2.48 mm Steel | 43 | 37.8 | 2100 | 20 | 18.8 | ||
| HFHB | M8 | 11 | 3.2 mm Copper CDA-110 | 32 | 33 | 2250 | 15.3 | 15.1 | ||
| HFH | M10 | 63 | 2.3 mm Aluminum | 39 | 53.3 | 2445 | 36 | 52.2 | ||
| HFH | M10 | 63 | 2.3 mm Steel | 58 | 71.2 | 3470 | 49 | 52.2 | ||
| HFHS | M10 | 31 | 2.3 mm Aluminum | 44 | 44.4 | 2445 | 36 | 29.9 | ||
| HFHS | M10 | 31 | 2.3 mm Steel | 44 | 57.7 | 3470 | 36 | 29.9 | ||
| HFHB | M10 | 22 | 3.2 mm Copper CDA-110 | 32 | 53.3 | 2500 | 25 | 24 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (ft. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | TENSILE STRENGTH (lbs.) | ||
|---|---|---|---|---|---|---|---|---|---|---|
| HFH | 032 | 4.6 | .060″ Aluminum | 15 | 3000 | 180 | 4 | 2400 | ||
| HFH | 032 | 4.6 | .060″ Steel | 65 | 6000 | 375 | 5 | 2400 | ||
| HFHS | 032 | 2.5 | .050″ Aluminum | 38 | 3000 | 180 | 4 | 1500 | ||
| HFHS | 032 | 2.5 | .058″ Steel | 52 | 4500 | 325 | 4 | 1500 | ||
| HFHB | 032 | 1.7 | .061″ Copper CDA-110 | 28 | 3400 | 150 | 2.9 | 1200 | ||
| HFH | 0420 | 9.6 | .060″ Aluminum | 43 | 5500 | 285 | 11 | 3820 | ||
| HFH | 0420 | 9.6 | .060″ Steel | 59 | 7000 | 480 | 11 | 3820 | ||
| HFHS | 0420 | 5.2 | .064″ Aluminum | 32 | 4000 | 285 | 8 | 2385 | ||
| HFHS | 0420 | 5.2 | .072″ Steel | 43 | 6500 | 480 | 8 | 2385 | ||
| HFHB | 0420 | 3.6 | .061″ Copper CDA-110 | 28 | 6000 | 380 | 5 | 1908 | ||
| HFH | 0518 | 20 | .091″ Aluminum | 39 | 8000 | 380 | 22 | 6280 | ||
| HFH | 0518 | 20 | .090″ Steel | 58 | 10000 | 590 | 22 | 6280 | ||
| HFHS | 0518 | 11 | .087″ Aluminum | 41 | 5500 | 380 | 15 | 3930 | ||
| HFHS | 0518 | 11 | .099″ Steel | 44 | 7500 | 590 | 15 | 3930 | ||
| HFHB | 0518 | 7 | .126″ Copper CDA-110 | 32 | 7500 | 500 | 11 | 3140 | ||
| HFH | 0616 | 35 | .091″ Aluminum | 39 | 12000 | 550 | 25 | 9300 | ||
| HFH | 0616 | 35 | .090″ Steel | 58 | 16000 | 780 | 36 | 9300 | ||
| HFHS | 0616 | 19 | .123″ Aluminum | 44 | 10000 | 560 | 25 | 5810 | ||
| HFHS | 0616 | 19 | .099″ Steel | 44 | 13000 | 780 | 25 | 5810 | ||
| HFHB | 0616 | 13 | .126″ Copper CDA-110 | 32 | 12000 | 560 | 18 | 4650 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | TENSILE STRENGTH (kN) | PULL-THRU (kN) | TEST BUSHING HOLE SIZE FOR PULL THRU TESTS |
|---|---|---|---|---|---|---|---|---|---|---|
| HFLH | M5 | 6.4 | 1 mm HC500LA | 89 | 51.1 | 1350 | 8.1 | 12.8 | 10.6 | 7.4 |
| HFLH | M6 | 11 | 1 mm HC500LA | 89 | 60 | 1400 | 14.4 | 18.1 | 15.5 | 8.2 |
| HFLH | M8 | 26 | 1.5 mm HC500LA | 91 | 71.1 | 2400 | 33.9 | 32.9 | 27.5 | 10.3 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (ft. lbs.) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (lbs.) | PUSHOUT (lbs.) | TORQUE-OUT (in. lbs.) | TENSILE STRENGTH (lbs.) | PULL-THRU (lbs.) | TEST BUSHING HOLE SIZE FOR PULL THRU TESTS |
|---|---|---|---|---|---|---|---|---|---|---|
| HFLH | 032 | 4.2 | .040″ HC500LA | 89 | 9500 | 300 | 60 | 2400 | 2200 | 0.279 |
| HFLH | 0420 | 10 | .040″ HC500LA | 89 | 13500 | 340 | 130 | 3820 | 3600 | 0.335 |
| HFLH | 0518 | 23 | .060″ HC500LA | 91 | 16000 | 575 | 290 | 6280 | 6280 | 0.407 |