我們的產品
THFE-M8-15ZI
用於薄板的重型螺柱 – THFE 型
加大的頭部直徑可減少面板上的應力。孔。 HB（布氏硬度）165 或更低的鋼板或鋁板。
Available on Pre-order
L/T "4 - 8 Weeks"
登入/註冊即可訂購！
| 重量 | 7.88636 公斤 |
|---|---|
| 螺紋代碼 | |
| 螺紋尺寸 | |
| 螺紋尺寸 X 螺距 | |
| 螺紋規格 | |
| 緊固件材質 | |
| 標準表面處理 | colorless, SC1 (5µm), Type III, Zinc plated per ASTM B633, Zinc plus Clear Chromate |
| 用於板材硬度 | |
| 長度代碼 | |
| Thread Strength_MPa | |
| 產品分類 | |
| CAD供應商 | |
| 卡帕迪 | |
| 應用程式類型 | Aerospace, Automotive, Automotive Electronics, Commercial Vehicles, Datacom, Electric Vehicle Chargers, Electric Vehicles, Industrial, Manufacturing & Sheet Metal Fabrication, Telecom |
| 基板材料 | |
| 品牌 | |
| 緊固件特性 | |
| 產業 | Automotive, Automotive Electronics, Datacom & Telecom, Electic Vehicles, Industrial & Commercial, Medical |
| PEM 產品系列 | |
| 產品類型 | |
| 技術類型 | |
| 單位（公制/統一） | |
| H Plus Minus 025 Mm | |
| Hole Size in Sheet + 0.13_mm | |
| L Len Pm 015in Or 4mm | |
| Min. Sheet Thickness_mm | |
| S Max._mm | |
| T Max._mm |
Resources
Catalog
Tech SheetWhite Paper
AnimationVideo
Installation & Performance Data
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | TENSILE STRENGTH (kN) | PULL THRU (N) | PULL THRU TEST BUSHING HOLE SIZE (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| THFE | M8 | 27 | 0.8 mm Aluminum | 44 | 56 | 582 | 12.2 | 32.9 | 27.8 | 10.3 |
| THFE | M8 | 27 | 0.8 mm Cold-rolled Steel | 47 | 71.2 | 881 | 13.1 | 32.9 | 28.1 | 10.3 |